• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

front fairing / silver panel rattle on a 2006 FX HO cruiser

jetboater4life

Jetboaters Captain
Messages
1,680
Reaction score
615
Points
247
Location
Rochester, MN 55901
Boat Make
Yamaha
Year
2010
Boat Model
X
Boat Length
21
I bought this jetski a couple of years ago from a fellow member. The fairings / silver panels on each side of the front part of the ski rattle really loud when at idle. It's not a major issue but I've decided it bugs me enough that this year I'm going to fix it. I plan to take it apart and add some rubber gaskets to quiet them down. If I press my hand on them or use my knee I can keep them quiet. This is cross posted on the https://www.pwcforum.com forum.

I'm looking for advice on how to tear this apart and fix the rattle. I'm certain others have faced this problem and probably have some good solutions. This is the first model year for the redone front end on the fx ho cruiser so it's not surprising there were a few minor issues.
 
Back
Top