• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

How do I get a spare ignition key?

db199

Jet Boat Lover
Messages
21
Reaction score
1
Points
65
Location
GA
Boat Make
Sugar Sand
Year
2001
Boat Model
Mirage
Boat Length
16
I have a 2001 Sugar Sand Mirage with the Mercury 175. I only have one key and realised that is probably a bad idea for obvious reasons. But I'm not really sure where to start on trying to get a new one. Do I purchase a blank from somewhere and have it cut locally? It isn't a normal looking car type key as it has a rubber shroud around it that comes down over the sides of the key hole(ignition switch) when inserted, I assume to keep water out. Thats probably a typical feature on boat keys but I'm not sure so giving out all the info I can.
 

pmorita

Active Member
Messages
21
Reaction score
14
Points
42
Boat Make
Sugar Sand
Year
2005
Boat Model
Tango Xtreme
Boat Length
17
I had no idea this existed. I bought my boat with one key and headed to Home Depot to get a spare. Just checked Amazon and they sell key caps that you can add to a boat key.
I didn't get one as I have not seen other boat keys with this cap so I figure the ignition switch likes to get wet.

 

Bizywk

Jetboaters Admiral
Messages
702
Reaction score
2,029
Points
272
Location
Indianapolis, IN
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited S E-Series
Boat Length
24
Not sure about that exact brand, but for manufacturers that vary their keys, there typically is a number on the key that a dealer can look up and replace. Often they have replacement keys in stock. If that doesn't work, a simple alternative is just buy another switch. It's usually a simple repair.
 
Top