We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Mounting hardware would be the same stuff a I/O small block Merc would use, I believe. Major hurdle is gonna be mating the engine to the drive. The bell housing bolt patterns are completely different and the crank flange bolt pattern is different. As you didn't list the year or the make of the drive you are mating to, thats about all the immediate info I can give you.