Jet Pump Assembly

[Jubin Payandeh]

I have a 2014 HO Impulse.
The bearings in the jet pump are shattered.
I am wondering if this is the replacement part.

Wsm Performance Parts Sea-Doo Jet Pump Assembly 1503 4-TEC 09-18 | 003-723K

Wsm Performance Parts Sea-Doo Jet Pump Assembly 1503 4-TEC 09-18|003-723K

www.vividracing.com

Assuming that it is then I can install an impeller and some grease and good to go?

Jubin.

 

[Luc Lafreniere]

Hi Jubin,

Are you familiar with http://epc.brp.com/

You can find all the official BRP part numbers. Select Rotax JPS, then AA = 2014, AB=2015, etc. You can find your engine model number and used that if you want to drill down exactly. Then HP, and specific model with cat, no cat, etc.

The jet pump section will have the part numbers so you can look up the details.

 

[Jubin Payandeh]

Here is where I am at:
Jet pump assemblies are sold out and back ordered for a while.
I sent my pump to the dealer I purchased the boat from some 7 years ago. Not particularly optimistic that it will be repaired soon if at all.
The boating season here has another 8 weeks tops.
I may be able to get a jet pump off a crashed 2019 GTX 300. I believe it is 161 mm vs 159 mm that I had.
Will it fit and will it work?
Otherwise, I suppose I can learn to love non-motorized watercraft.

 

[Jubin Payandeh]

Happy to report that I am up and running again.
I had a plan A & B, both worked out.
The jet pump was shipped to the dealer I purchased the boat from nearly 7 years ago. They rebuilt and shipped back 2 weeks later.
I was also able to purchase a rebuilt pump from a shop on EBay that shipped from the US. It is hard to find parts suppliers that have stock, especially ones that will ship to Canada.
Both pumps arrived at the same time.
Installed my original rebuilt pump last night. Easy to do. Runs great, hitting top speed, 44 mph again.

Jubin.