JL sub with port lounge seating

[Fpdr1113]

So I went to install my JL m10ib sub yesterday, when measuring for location, the port side lounge seat seems to interfere with the sub, I could possibly install it but the seat would definetly rest on top with a little pressure, which has me worried about seat getting rubbed through. Does anyone have pics of their install? I measured behind the table bracket and there isn't enough room. I went to the starboard side and if I install there it eats into the cooler storage. Before I do that I had a couple ideas. Has anyone put a sub on starboard side facing the helm? That area is greatly curved so I would have to make a spacer to allow flush mounting. That would give more storage for cooler and keep sub from getting banged by passenger feet

 

[veedubtek]

I had 2 JL 10's into the cooler compartment, and still had room for the cooler in it's original location (barely).

I did quickly graduate to a soft sided AO cooler and kept it in the head, but not because of the speakers.

 

[Fpdr1113]

Mine is 2011 limited s, there is only about 2.5 inches to cooler from wal, my sub is 6 inches deep

 

[veedubtek]

Using stock cooler? Mine was also a 2011 Limited S.

 

[Fpdr1113]

No, it's an igloo that fits the cutout in floor near perfect

 

[veedubtek]

Stock one is an Igloo IIRC, can't remember for sure. My JL's were only 5 1/8" deep says the google right now, so you should be close! Sorry, can't answer the forward facing question, I swear I've seen someone on here that mounted one there though.