• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Old wired remote

Scott griffith

Jet Boat Junkie
Messages
404
Reaction score
167
Points
142
Location
Pensacola fl.
Boat Make
Yamaha
Year
2003
Boat Model
SR
Boat Length
23
Was wondering if anybody had a old wired remote off there factory head unit like in the pic
 

Attachments

  • IMG_20160802_200620766.jpg
    IMG_20160802_200620766.jpg
    2.7 MB · Views: 20
Which year is it? I have this off an 2005 AR230
43494-57ba39f2205eb9af3bf9acf17c9aec87.jpg
 

Attachments

  • IMG_1777.JPG
    IMG_1777.JPG
    1.2 MB · Views: 18
I believe it's off a 07 really just looking for the wiring
If you are splicing at the remote, you could just cut the plug off and splice wire to wire.
 
Looking at wiring up two remotes really need the wiring with the black plug on it I already have a splitter
 
I'm literally outside trying to take the old one off. Replacing with Fusion MS-NRX300. At any rate, the 2 screws just spin.. and spin and spin. After struggling to slide my hand up around to the back of one screw doesn't appear any bolt or anything preventing the screw from backing out all the way. Maybe there is some sealant holding the back plate on. Should this thing just come off. I'm about to just break it off. :)
 
I'm literally outside trying to take the old one off. Replacing with Fusion MS-NRX300. At any rate, the 2 screws just spin.. and spin and spin. After struggling to slide my hand up around to the back of one screw doesn't appear any bolt or anything preventing the screw from backing out all the way. Maybe there is some sealant holding the back plate on. Should this thing just come off. I'm about to just break it off. :)
Pry with a flat blade screwdriver while reversing the screw.
 

Attachments

  • image.jpg
    image.jpg
    2.9 MB · Views: 5
Back
Top