• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Per Hole question?

Bluewater272

Jetboaters Admiral
Messages
2,886
Reaction score
3,925
Points
327
Location
Medford, NJ
Boat Make
Tidewater
Year
2024
Boat Model
Other
Boat Length
27
9E3D6314-CBC5-4E21-B82A-0872F8DECA80.jpeg

2017 Limited S, which pee hole goes with which engine? As we were cruising back to our slip, I noticed one was flowing significantly less than the other (aft was low) and significantly hotter than the other. Boat was running fine all day, no overheat alarms. We’ll be pulling it out next weekend anyway. Wicked storm came in right after we docked so couldn’t troubleshoot on the water.

Anything to worry about absent any other symptoms?
 
View attachment 77338

2017 Limited S, which pee hole goes with which engine? As we were cruising back to our slip, I noticed one was flowing significantly less than the other (aft was low) and significantly hotter than the other. Boat was running fine all day, no overheat alarms. We’ll be pulling it out next weekend anyway. Wicked storm came in right after we docked so couldn’t troubleshoot on the water.

Anything to worry about absent any other symptoms?

I believe front is starboard and rear is port but you could start one engine and check to see which is which. I’d guess one of the intake screens in the pump might have some growth or something possibly clogging it. Is it just weaker at idle or even at higher RPMs?
 
Is it possible that your throttles weren't exactly the same RPM therefore not the same amount of water coming out of each pisser?

If you peek inside the rear storage compartment you can see the hoses connected to the pisser fittings. Follow the hose back of the offending weak pisser to see which engine it goes to. Below is a pic of my storage compartment and my pissers are different but should be the same area to follow them back to the engine(s). They should go directly across through a cutout in engine compartment side panel. You can stick your arm in the storage compartment and wiggle the hose back and forth while watching for it to move in the engine compartment.

IMG_9422.JPG
 
RPMs were matched, in no-wake mode at 2K RPM. I hadn't looked at them earlier in the day, just happened to notice while I was putting fenders out (usually the wife does this, but she was driving back).
 
Back
Top