giroux68
Jetboaters Captain
- Messages
- 441
- Reaction score
- 587
- Points
- 212
- Location
- Cumming, Georgia
- Boat Make
- Yamaha
- Year
- 2011
- Boat Model
- AR
- Boat Length
- 24
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Pump wear rings issues
- Thread starter giroux68
- Start date
giroux68
Jetboaters Captain
- Messages
- 441
- Reaction score
- 587
- Points
- 212
- Location
- Cumming, Georgia
- Boat Make
- Yamaha
- Year
- 2011
- Boat Model
- AR
- Boat Length
- 24
Ive been having a "alignment" problem lately. It seen to vere left. Like the right jet is putting out more thrust. I'm guessing this is part of the problem. But I haven't gotten to the other jet yet.
giroux68
Jetboaters Captain
- Messages
- 441
- Reaction score
- 587
- Points
- 212
- Location
- Cumming, Georgia
- Boat Make
- Yamaha
- Year
- 2011
- Boat Model
- AR
- Boat Length
- 24
Neutron
Jetboaters Admiral
- Messages
- 3,987
- Reaction score
- 6,471
- Points
- 417
- Location
- New Bern, NC
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 24
Good luck removing that, i wouldn't. Might not even be available anymore.
Seen a lot of those discontinued
I would just sand as smooth as possible and fill any gaps with something semiperminant.
Sealant where the wear ring meets it and send it
