• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Roswell forward swept tower - swivel wake surf rack

sysinu

Jetboaters Captain
Messages
1,068
Reaction score
548
Points
217
Location
Park City, UT
Boat Make
Yamaha
Year
2014
Boat Model
Limited S
Boat Length
24
Anyone have an identified wake surf rack that works for the Roswell forward swept rack on the "older" 242LS? I have this one and I don't like it at all. image.jpg


My wake rack is great but it won't fit a surf board.

I want to have a rack that swivels all the way in but can fit something as large as a kneeboard.
 
check out Skylonsports.com
 
Okay, you're 100% right, as usual. because of the adjustable angle coming off of the tower clamp to the pivot, it's going to enable the rack to swivel the full 180 degrees into the inside of the boat.

Now the only issue is how symmetrical my tower will be with one rack of type A and another rack of type B. I may just have to buy a full new set.


Edit: order placed for 1 of them. I'll let you know how it turns out. I just did a swivel mount order. I will probably try to use my roswell rack that I have already and then just replace the swivel piece. Then I'll sell the swivel piece to some sucker, err... lucky person.
 
Last edited:
Back
Top