• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Scarab 195 HO - water coming in

Lbedford1962

Member
Messages
3
Reaction score
0
Points
10
Boat Make
Scarab
Year
2016
Boat Model
HO Impulse
Boat Length
20
Hello everyone. New to the forum and 1st time poster. We have a 2016 Scarab 195 HO that we got out of storage today and went for our 1st cruise of the year. Boat ran fine but we started the ski locker filling up with water. Opened the engine compartment and saw water coming in through a drain hole right next to the bilge pump motor. Cruising, no water. Stop and the water comes in. Pulled the boat out and noticed on the back of the boat above and the the left of the lower drive there seems to be a flapper valve missing. Pics are attached if anyone else has and the same issue or can point me in the right direction. Thanks in advance.
 

Attachments

  • IMG_7932.jpeg
    IMG_7932.jpeg
    398.3 KB · Views: 7
  • IMG_7933.jpeg
    IMG_7933.jpeg
    353.2 KB · Views: 7
That isn't supposed to have a valve. It connects to the resonator box inside the boat. Check the clamps that lead to the resonator box. You probably have one loose. You didn't tighten them by any chance did you? It's possible to overtighten and crease/crack the plastic.
 
Thanks for the reply. I have not tightened them but I’ll look and see if the hose came off. Sorry for what may seem like a stupid question, so there is a hose on the inside of the engine compartment that connects to that valve?
 
1685143671041.png
Thanks for the reply. I have not tightened them but I’ll look and see if the hose came off. Sorry for what may seem like a stupid question, so there is a hose on the inside of the engine compartment that connects to that valve?


Yes, see pic. But it is NOT a valve. It's lierally completely open. Water came come in and out freely by design.
 
Oh, and no stupid questions. We all started somewhere :)
 
Thank you so much. Checking it as soon as I get home.
 
Back
Top