2004Lx210
Active Member
- Messages
- 1
- Reaction score
- 0
- Points
- 30
- Boat Make
- Yamaha
- Year
- 2004
- Boat Model
- LX
- Boat Length
- 21
Ok question for you experts.
I just bought a 2004 lx210 and none of the gauges are working. I have replaced every fuse I could find and I do not see any disconnect Ted wires.
So I thought I would start with troubleshooting the gas gauge starting with the sending unit. If I touch the negative and red wire (no strip) together it pegs the gauge. That tells me the gauge and wiring are good (could be wrong but that was my logic).
I order a new sending unit off Amazon and it arrived today. The new unit only has two units wires 1 brown and one blue. Blue is ground and brown goes to gauge. From what I read in other posts I figure I hook the black wire to the blue wire and the brown wire to the red wire. But this just pegs the gauge. Any ideas ? Of course the new unit from Amazon has no instructions.
Old wiring
I just bought a 2004 lx210 and none of the gauges are working. I have replaced every fuse I could find and I do not see any disconnect Ted wires.
So I thought I would start with troubleshooting the gas gauge starting with the sending unit. If I touch the negative and red wire (no strip) together it pegs the gauge. That tells me the gauge and wiring are good (could be wrong but that was my logic).
I order a new sending unit off Amazon and it arrived today. The new unit only has two units wires 1 brown and one blue. Blue is ground and brown goes to gauge. From what I read in other posts I figure I hook the black wire to the blue wire and the brown wire to the red wire. But this just pegs the gauge. Any ideas ? Of course the new unit from Amazon has no instructions.
Old wiring
