Danielmailin
Jetboaters Commander
- Messages
- 298
- Reaction score
- 403
- Points
- 187
- Location
- Homestead, Florida
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- FSH Deluxe
- Boat Length
- 19
Hello guys, I have been watching and reading all the Trim Tabs threats, but I have not seen anyone install them on a 190 FSH. I believe it should be the same for a SX190 or AR190.
I'm looking into installing them on my boat and would like to know which Lectro Trim Tab kit would work best.
I'm looking at the following kit in Amazon:
6217751 Lenc TT9X12 Kit W/122 RKR Switch
https://www.amazon.com/gp/aw/d/B003E1WJLU/ref=ox_sc_act_image_3?smid=A2ZO16S61GUQY7&psc=1
I would like to know if anyone has had any experience on a 190 hull installation or any tips before I start this project. I will be posting a step by step with pictures and my review on them once installed.
Any suggestions or comments are welcomed.
Thank you!!
Danielmailin
I'm looking into installing them on my boat and would like to know which Lectro Trim Tab kit would work best.
I'm looking at the following kit in Amazon:
6217751 Lenc TT9X12 Kit W/122 RKR Switch
https://www.amazon.com/gp/aw/d/B003E1WJLU/ref=ox_sc_act_image_3?smid=A2ZO16S61GUQY7&psc=1
I would like to know if anyone has had any experience on a 190 hull installation or any tips before I start this project. I will be posting a step by step with pictures and my review on them once installed.
Any suggestions or comments are welcomed.
Thank you!!
Danielmailin
