• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Wake rack

Cuse1316

Well-Known Member
Messages
1
Reaction score
0
Points
50
Boat Make
Scarab
Year
2017
Boat Model
HO Impulse
Boat Length
19
Hello everyone. New 2017 195 HO owner and new to the forum. I'm looking for some after market wake racks for my boat. With the new style tower they have built in brackets and just not sure if they are only able to accept a certain kind of rack. Thanks
 

BMF JK

Jet Boat Junkie
Messages
199
Reaction score
180
Points
142
Location
Rochester NY
Boat Make
Scarab
Year
2016
Boat Model
HO Impulse
Boat Length
19
Welcome aboard and congrats on the new boat ! Post pics of your boat and the brackets you have on your tower , I'm assuming you have the tower the wake edition had for 2016 ? I have the forward swept tower , but I'm sure a wake edition owner will be able to answer your question.
Add your location to your profile, so members near you can help with area specific questions you may have in the future .
 

justason

Jetboaters Admiral
SWAG Forum Lead
Messages
1,785
Reaction score
2,238
Points
287
Location
27574
Boat Make
Yamaha
Year
2009
Boat Model
X
Boat Length
21
Hello @Cuse1316 I'm not familiar with your boat design but I'll offer this:
I bought new wake racks to accommodate a wake surf board at http://www.diywake.com I believe i bought this one: http://www.diywake.com/kneeboard-wakeboard-combo-rack-fork

take a look at the drawing at the bottom. the 1.75" mounting spacing is pretty common, validate that and you should be good to go. These allowed me to keep my unique bracket for the tower i have and simply swap out the OEM brackets. I had to buy new hardware as well

note: These fingers don't have a Bungee cord attached to them. they are part of the base. I use these: https://www.amazon.com/gp/product/B00EVNMM8U/ref=od_aui_detailpages00?ie=UTF8&psc=1

welcome to the forum !
 
Top