• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Reminder of the Thrust Vector and Lateral Thruster group buy through JetBoatPilot.....you only have Until AUGUST 31st. to get in on this group buy.
    With a Maximum discount of 35% this is the highest discount you can get on these, so don't miss out!
    So if you are looking to improve your steering-either forwards or in reverse.....this sale may be for you!  

    Thank you Will @jetboatpilot for offering this exclusively to JETBOATERS.net members!

    (You can click the X to the right to dismiss this notice)

Wakeboard Rack Swivel

HangOutdoors

Jetboaters Admiral
Messages
7,284
Reaction score
8,398
Points
482
Location
Royal Oak, MI
Boat Make
Yamaha
Year
2020
Boat Model
AR
Boat Length
21
I have a 2020 AR210. I purchased used fixed Wakeboard/Wakesurf racks. I wasn't a big fan of them. So I am looking for a good, don't break the bank, preferably all Black Swivel Wakeboard/Surfboard combo rack. Probably just need 1 for now, but could buy two depending on the price. I looked at several on the internet and here on the threads and I am unsure.

I have a 141cm Wakeboard and a ZUP 2.0 which is thicker but I believe would be ok in the surfboard hanger.

Any suggestions would be awesome. I really don't want to go through a big trial and error on this. We are heading out to lake Michigan in two weeks with a lot of gear in the boat so I would like to get the boards up out of the way.

Any advice would be awesome, thanks.
 
I bought this one for the ZUP board, they offer a swivel but I didn't purchase it. It pretty narrow so I didn't see the need. Priced right and it was to my house in 3 days.

 
Couple pics of it
 

Attachments

  • D4F39A12-5022-431E-BEB2-56C788FF8E61.jpeg
    D4F39A12-5022-431E-BEB2-56C788FF8E61.jpeg
    1.9 MB · Views: 96
  • 9A3E7FD7-12C1-4A45-95C1-26946BE56007.jpeg
    9A3E7FD7-12C1-4A45-95C1-26946BE56007.jpeg
    2.3 MB · Views: 91
Huh, that boat looks awful familiar. :) Does it hold it in there solid? Can you drive with it in the rack on the trailer or not?
 
Huh, that boat looks awful familiar. :) Does it hold it in there solid? Can you drive with it in the rack on the trailer or not?
Yeah actually the strap that comes with the rack is a PITA to get wrapped all the way around that big ass board, but it's solid once you do. Not sure I'd trust that strap alone for travel, but you could probably throw a ratchet strap around the entire board and rack and be ok.
 
Ordered. Thanks. Also got the

 
Ordered. Thanks. Also got the


Cool, I'm happy with the quality of it for the price. They send you numerous rubber sleeves to get the clamp tight on your set up. I couldn't get one sleeve to fit properly on the rear downward pipe of our towers, but I was able to on the front bar.
 
Ordered. Thanks. Also got the

Looking to get a swivel rack as well. How is this one holding up? Website says quick release, so do you hard mount it then twist the knob to rotate the rack towards you for easier loading/unloading of the boards?
 
Yes, that is how it is done. Also the racks are holding up great, I have no issues whatsoever.
 
Was 1 7/8” the correct adapter size to mount it?
 
Back
Top