vesder21
Jet Boat Lover
- Messages
- 186
- Reaction score
- 58
- Points
- 77
- Location
- Cleveland Ohio
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- FSH Sport
- Boat Length
- 21
This is perfect and very helpful, thanks!!!
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Yamaha Center Console Cover
- Thread starter vesder21
- Start date
This is perfect and very helpful, thanks!!!
Tailwaters
Jetboaters Lieutenant
- Messages
- 662
- Reaction score
- 308
- Points
- 152
- Location
- St Joseph MI
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- FSH Sport
- Boat Length
- 21
Be sure and start up front. I'd put some blue tape along the bottom. Drill and install the 1st snap and work your way out. Install the 1st and pull the cover tight to find the center of the next snap. Don't pull super hard just hard enough to pull the slack out.
Similar threads
