Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

General Discussion

Yamaha Wetsounds upgrade issue

Thread starter 275SDNJ
Start date Aug 1, 2023

275SDNJ

Member

Aug 1, 2023

I have the 2022 Yamaha 275SD. I'm currently upgrading the system. It has the stock wetsounds 6 channel amp. I added two sinister WS amps for 4 towers I installed. I'm now using the stock amp to run the 6 - 6.5 stock component speakers. Was able to pig tale to the DSP but now I'm encountering a clipping issue. I know some people have posted a harness they found that will instead plug into the stock amp to jump into an RCA out. Does anyone have any info on these types of plugs?

You must log in or register to reply here.