yds not powering up

[jon c anderson]

upper left plug says diag s to the right says diag bottom right says diag p , i hooked my yds cord to diag s where my issue is but getting no powered up the purple wires says s eng on so id think that would be starboard then checked for power on purple wire nothing , wondering of there is another interface cable needed because diag connector is different , any advise ???? ty for your time

 

[Neutron]

What yds software are you using?
Sometimes you have to unplug the main tach plug

 

[jon c anderson]

What yds software are you using?
Sometimes you have to unplug the main tach plug

What yds software are you using?
Sometimes you have to unplug the main tach plug

Werz that plug ? I’m getting no power at the plugs

 

[Neutron]

Unfortunately that wont work. That will only do older models
You will need YDS Pro or something similar.
I know it says up to 2017 but its for around 2012 and older