DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
My trailer tongue is leaking. I think I need a new coupler. Or whatever it's called.
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
What iis a good place to buy trailer parts.
- Thread starter DCB-270
- Start date
Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,775
- Reaction score
- 12,191
- Points
- 667
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
Check out etrailer.com and/or pacific trailer.
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
OK I think I have single Axel risk brake.
Last edited:
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
Disc
Last edited:
Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,775
- Reaction score
- 12,191
- Points
- 667
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
Oops, it's pacific trailers (not pacific trailer). Here is a link to their products page.
https://www.pacifictrailers.com/collections
https://www.pacifictrailers.com/collections
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
Thanks
maboat
Jetboaters Captain
- Messages
- 1,070
- Reaction score
- 626
- Points
- 227
- Location
- Lake Ray Hubbard, TX
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- AR
- Boat Length
- 23
The brakes are made by UFP. You can find a maintenance manual here:
http://www.ufpnet.com/Actuators/tabid/54/Default.aspx
http://www.ufpnet.com/Actuators/tabid/54/Default.aspx
yamahaar230honewb
Jet Boat Lover
- Messages
- 18
- Reaction score
- 16
- Points
- 72
- Location
- Annapolis, MD
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- AR
- Boat Length
- 23
I shopped around a bit last year when ordering my trailer parts for my rebuild. I ended up getting things from a few different sites.
Here is a link to my rebuild and where I got the parts from. https://jetboaters.net/threads/mfi-trailer-rebuild.11306/
Here is a link to my rebuild and where I got the parts from. https://jetboaters.net/threads/mfi-trailer-rebuild.11306/
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
Taking the brake cable off the actuator there is a lot of wind up in the cable. Do I need to unhook it in the back?
Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,775
- Reaction score
- 12,191
- Points
- 667
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
If you are talking about the thin emergency break cable I recommend that you not mess with it. I found it to be a pita to replace. If I had to do it all over again I would just replace the entire actuator.
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
No the main break cable.
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
New actuator.
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
To avoid having to pre wind the brake cable I found a brake line with ends that pivot. 
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
Probably should have said brake line instead of cable.
maboat
Jetboaters Captain
- Messages
- 1,070
- Reaction score
- 626
- Points
- 227
- Location
- Lake Ray Hubbard, TX
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- AR
- Boat Length
- 23
Are Bud and Miller helping you? 
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
Most of the time.Are Bud and Miller helping you?
Got it back together. Now just need too bleed.
DCB-270
Jetboaters Captain
- Messages
- 756
- Reaction score
- 388
- Points
- 222
- Location
- Edmond Oklahoma
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- SS
- Boat Length
- 21
Wouldn't bleed. Just sucked air. End up replacing the main break line with 19 ft thermoplastic beak line. Perfect length for my boat. Bleed out good.
