• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Lost the locking pin for the table leg mount...

jameskeller76

Jet Boat Junkie
Messages
385
Reaction score
351
Points
142
Location
Georgetown, TX
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Every time I take this boat out I find something loose or missing. Well this weekend it was the pin that locks the table leg in place. Naturally it was the one on the swim platform area so she gone.

Looking at yamahasportplaza I see what I think is the right part but its saying the quantity to order is 8. So either its the right part with wrong qty or just the wrong parts.

Anybody know for sure?

TIA

upload_2017-7-6_15-40-58.png
 
You might have to contact the actual maker of the table mount, Garelick.com to get the pin.

What you have highlighted is the mounting hardware.
 
Last edited:
You might have to contact the actual maker of the table mount, Garelick.com to get the pin.

What you have highlighted odd the mounting hardware.
Thanks, that's what I thought. Sigh
 
I believe its part of the table bracket. #42

It should be just like mine and there is an internal spring that snaps the pin back into place. It will be an entire assembly.
I would verify with your local Yamaha parts guy though.
 
they wedge in by gravity...do you really need a locking pin?
 
Thanks, I'm sure hoping that I don't have to go that route.
Depending on your purchase date that may still be under your warranty.

I would contact my selling/servicing dealer.
 
Back
Top