trim tab installation

[Phil1950]

looking to put bennett bolt 12x12 tabs on my 2015 yamaha AR 240. i know they need to be mounted to the underside of the swim platform but what i need to know is the length of the actuator i'll need bolt has there limited space one which is 6 3/4" lenght or the other is 13 3/4". also if anyone has installed them how diffecult is it to route the wires thru the swim platform any pics or advice would be greatly appreciated. thx

 

[VitaminSea]

Welcome aboard! There are quite a few post regarding the installation process, below is one example. You can find more using the search function.

Russ at Lectotab is very helpful and has in the past assisted members with discounted pricing. Recommend giving them a call before you order elsewhere.

Post in thread 'Lectrotab Trim Tabs'
Lectrotab Trim Tabs

 

[Neutron]

looking to put bennett bolt 12x12 tabs on my 2015 yamaha AR 240. i know they need to be mounted to the underside of the swim platform but what i need to know is the length of the actuator i'll need bolt has there limited space one which is 6 3/4" lenght or the other is 13 3/4". also if anyone has installed them how diffecult is it to route the wires thru the swim platform any pics or advice would be greatly appreciated. thx

I would use Lectrotabs since they are very familiar with your boat and 12x12 might be a little too deep and hanging out behind the boat could be a toe stubber or even cutter.
As @VitaminSea said call russ. He has complete kits for your boat. He does group buys every so offten ask him

I have them and couldn't be happier with the quality, installation, and use. 16x9 i believe

 

[jacoviii]

Lectrotabs 100%

 

[Phil1950]

thanks for the info would these tabs be ok for a boat left in fresh water for the season? i boat on lake michigan. thx again

 

[Neutron]

thanks for the info would these tabs be ok for a boat left in fresh water for the season? i boat on lake michigan. thx again

Yes they are perfect for that