• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results for query: nano hull repair

  1. Cobra Jet Steering LLC

    2017 Waverunner VX Deluxe Hull Repair

    see if any of these posts help you https://jetboaters.net/search/628471/?q=nano+hull+repair&c[users]=Cobra+Jet+Steering+LLC&o=relevance
  2. Cobra Jet Steering LLC

    Be carefull with the NANO hulls

    I have had numerous nano hulls and never had one that did not fail never. So I learned how to fix it and just do the repair when needed, I just deal with it. Now I need 2 more new yamaha skies with the 1800 non supercharged engines so I can run another 800 plus hours on them. Aside for the...
  3. Cobra Jet Steering LLC

    Which GP1800 Waverunner should I buy?

    haaaa choices, I live on these things 180 hp is plenty for an 11 foot boat, I never ran regular in either of my supercharged engines I usually ran mid grade from the pump . I had a non cruiser seat on my supercharged ski but now my left hip is really bothering me. Back in my mid 30's I was...
  4. Cobra Jet Steering LLC

    Clean out plug blowout and engine flood. Help!

    well apparently they do not offer dextron 2 anymore so that being the case the substitute does NOT mix with water according to his research so My suggestion is to hook up a wet vac to the oil filter location after removing the oil one more time and let the vac try to remove the water through...
  5. Cobra Jet Steering LLC

    Be carefull with the NANO hulls

    I am on my 4th N A N O hull and so far every single one has developed leaks in the front possibly from beaching , although I have 2 nice anchors and I usually anchor my skies away from the shore I do bring them up close to the beach when add fuel. I never let my tanks get to 1/2 since I just may...
  6. Cobra Jet Steering LLC

    How are these new 3 cylinder engines?

    I certainly do not rent skies. These are for me to destroy ,I seriously doubt any average person would drive a ski like I do so if they hold up to my abuse I would say they are pretty good. My problem is always the nano hulls but I know how to repair them so I don't worry about that. if they...
  7. Cobra Jet Steering LLC

    EFI Engines and Spark Plugs

    I add never seize on the plugs before ever running a 1800 engine as well as silicon grease on the coil boots. I use iridium plugs when the engines start running a little rough so that is normally every season or so and it does make a noticeable improvement. I also have my own design for a...
  8. Cobra Jet Steering LLC

    Be carefull with the NANO hulls

    Well EVERY single nano hull I have owned has failed and fairly soon like in the first year or so, I build up the area with special epoxy resin and special fiberglass mat with no talcum powder in it so it will work with the resin I also add the color, I cover it with wax paper and use a Bondo...
  9. Cobra Jet Steering LLC

    Need some help about a Used Jetski I'm considering

    The concern would be the timing chain failures of those models, however the dealer can tell you if Yamaha will cover it if it fails, That would be a huge expense if you had to fix it as opposed t0 Yamaha doing it although I was without my ski for a couple months having one repaired. The hours...
  10. Cobra Jet Steering LLC

    Be carefull with the NANO hulls

    The composite fractured in lines parallel with the center beam of the hull and yes I could see the foam between the cracks it was sort of like fracturing bamboo long fractures and thin pieces between the cracks, you could push it in with one finger. I did not get all excited about it since I...
  11. Cobra Jet Steering LLC

    Jet Ski recommendations

    Well I never pull punches KAWASUCKI SUCKS I WILL NEVER BUY ANOTHER, I HATED MINE I laugh when I see someone on one of the supercharged skies in salt water, they usually end up on the trailer with the alarms going off. I purchased mine new, it spent more time in the shop than in the water. I...
  12. Cobra Jet Steering LLC

    Have you had a 1.8 timing chain failure, was it in warranty and how has Yamaha handled it?

    I disagree with the Hand full of chains failing statement and here is why, when I took my ski to the local shop they said there were 2 others that just came in ahead of me with the same thing wrong, they thought it was serious enough that it should be a recall is what they told me. So how many...
  13. Cobra Jet Steering LLC

    NEW YAMAHA ENTRY-LEVEL PWC ... The "V1" - Test Video !

    like I said on Nov 29 in this thread, the hulls are NOT repairable, plus the lack of access to the engines etc this is just another attempt at selling people a price rather than a product. Look closely at what you are getting for the price and go from there. A damaged hull requires you to...
Top