• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

clean out plugs

  1. M

    Newer (2020) clean out plug issue

    Hey gang, been reading around the forum and haven't found a great solution. I have a 2020 212x and have loved it, except the clean out ports. My god do they suck. Essentially after taking them out a few times to clear seaweed or when I get an error, they are very very very hard to get back in...
    • Manningr22
    • Thread
    • clean out plug clean out plugs clean out port clean out port; manhole assembly; repair
    • Replies: 3
    • Forum: General Discussion
  2. G

    Stuck Clean Out Plugs! Help

    I purchased a 2006 Yamaha AR230HO. Tried removing both clean out plugs and the button is seized. I’ve tried using the floor jack suggestion and they would not budge. I’m afraid continued 1 1/2 ton pressure may crack my gel coat. I’m at wits end….. Any help would be appreciated……thanks
  3. shibumi

    Brittle rubber on clean out plugs

    Hi Folks - just picked up a new-to-me 2019 242 LSE that had been sitting in the shop for 14 weeks (waiting on a backordered transducer - a whole other story lol) and when I got it home I found that the clean out plugs were in - and the area was full of water. I was kind of annoyed that the...
  4. R

    Help requested. Clean out plug blew, possibly made some mistakes

    So I am going to start that hind sight is 20/20, and I am sitting here worried I might have made a few mistakes. Praying zero are serious. I have only owned the boat since late May. Today I took my 2014 AR240 out with my extended family. My brother-n-law wanted to help with the clean out...
  5. Dennis P

    Rebuilt Clean Out Plugs, but different

    Hi everyone, I trust you are all doing well during these uncertain times. With time on my hands I rebuilt my cleanout plugs for my 2008 232 Limited. I noticed that the design of the new base is different from the original base, is this normal?
  6. S

    Yamaha - Clean out ports <handles missing>

    2008 Yamaha 230 - Recently - Purchased - 1st time JetBoat owner. Handles for Clean out ports are missing. Can anyone guide me in removing existing plugs without damage? Any help is greatly appreciated. SA
  7. Andy Orton

    Rope vs impeller shaft

    So there we were, Out in the SX195, getting ready to tube, one friend in the tube, another holding the rope. I was thinking he was tending the rope to make sure it wouldn't go under the boat, and he wasn't thinking anything, just holding the rope... I started to motor out and things went all...
    • Andy Orton
    • Thread
    • clean out plugs impeller problems learning things the hard way safety ski rope tow rope tubing yamaha
    • Replies: 9
    • Forum: General Discussion
Back
Top