• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2006 sx230 Middle Injectors not working after fast idle goes down

vollender

Active Member
Messages
5
Reaction score
0
Points
40
Boat Make
Chaparral
Year
2016
Boat Model
242 Limited S E-Series
Boat Length
21
I have a 2006 sx 230. When starts up all 4 injectors will spray. When fist idle stops the 2 middle injectors will not spray. If I shut off for a few and pressure backs off then start all 4 will spray then stop after fast idle goes down. I put 2 different injectors in the middle and the same thing.

Is this a ecu problem
 
More than likely, yes! Swap the ECUs and see if it follows.
 
Is ecu in black box on back wall
 
Yes, it's in the big black box on the back wall of the engine compartment. It's a LOT easier if you have a second person to hold a wrench from the back side. (you need to remove the cleanout tray on the swim platform to access the back side) Otherwise, it's not too bad.
 
You could also swap ECU's with the other engine, just to verify the problems follow the ECU. It's a simple and effective way to troubleshoot things.
 
Back
Top