• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2006 SX230HO Bilge Pump Hose Diameter

Greg__Berger

Jet Boat Lover
Messages
32
Reaction score
10
Points
77
Location
St. Louis, MO
Boat Make
Yamaha
Year
2006
Boat Model
SX
Boat Length
23
Could anyone confirm the bilge pump hose diameter and needed length for a 2006 SX230HO? I discovered that ours was cracked in half behind the starboard engine when we pulled it out of the lake this weekend. It's in storage there so I can't go check but want to have replacement ready for our trip back next weekend. Thinking of just getting some nylon reinforced hose from the local hardware store rather than that corrugated plastic hosing that is stock. Thanks in advance!
 
I added a second bilge, and it had 1 1/8" hose, but I'm basically certain that the original bilge hose is smaller. I know for a fact the through-hull fitting is smaller. Hopefully someone chimes in with some better info...
 
Back
Top