• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2007 Yamaha SX 230 Depth Finder Mounting

YamahaziPilot

YamahaziPilot

Active Member
Messages
30
Reaction score
14
Points
37
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
I have searched through some threads and wanted to see if anyone has any pictures or suggestions for the mounting location of a depth finder. I bought a nice Raymarine one and am looking for ways to mount it. I am trying to avoid reworking my dash and adding engine management. I had my Simrad NSS8 mounted to a RAM mount on my old bass boat and it worked well, however the dash cluster and cockpit space it tight on my boat and I don't want to over crowd. Any suggestions would be appreciated, also if you guys have any suggestions for replacing the factory depth finder that would be awesome. Side note : The Raymarine is going to be used for chart plotting and depth, would also like to know if you guys have any suggestions for the GPS mount. I don't have a wake tower. A lot to ask in one post, thanks again and happy boating everyone.
 
You must log in or register to reply here.
Top