• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

2014 195HO Impulse

Dan Hops

Jet Boat Lover
Messages
12
Reaction score
0
Points
75
Location
Kingston, Ontario
Boat Make
Scarab
Year
2014
Boat Model
HO Impulse
Boat Length
19
Just had my supercharger rebuilt. Took it out today. I'm down about 10mph top speed.
It cavitates on take off. Seems like it's working way too hard to cruise at about 25 mph. 7500 rpms.
Anyone have any insight or issues like this?
Or should I be looking at possible other issues. Impellar and wrsr ring are both good
 
If your impeller and wear rings are both fine, no check engine light (aka, all pistons firing correctly) and you're able to reach those rpms... I mean, the suspect is the supercharger. I'd check with the dealer that did the work. Not sure what else would cause this if the other stuff I mentioned is not a problem.

And I assume that when you say the impeller and ring are fine, that you've checked AFTER you've had this problem? Aka, no sticks stuck in there or other?
 
Back
Top