• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2014 Scarab 215HO O2 Sensors

J

John P Jones

Jet Boat Addict
Messages
44
Reaction score
2
Points
87
Boat Make
Scarab
Year
2014
Boat Model
HO Impulse
Boat Length
21
Looking for replacement parts - O2 sensor came up bad on the CanDoo Pro scanner.
Attached is a photo of the sensor removed - BRP PN 0460374. Contacted a dealer in another state (since Ct doesn't seem to have any more dealers) and they had BRP PN 0461576 as a replacement.
I did find an O2 sensor on iBoats - has the right connector - but not sure if this would fit/work on my boat.
Any ideas?
 

Attachments

Dean P

Dean P

Jetboaters Admiral
Messages
3,471
Reaction score
4,915
Points
357
Location
Florida
Boat Make
Chaparral
Year
2017
Boat Model
VRX
Boat Length
22
I would look around. See chart below. Same part used for different manufactures. Prices variation are huge. If the end and the fitting are the same, go for it. A lot of time it's the length of the wires that "make them different". Good luck.

1623523841604.png
 
You must log in or register to reply here.
Top