2016 212x Ballast System

[sg77799]

Purchased a 2016 Yamaha 212x recently. All of the functions work as they should besides the ballast system. When I flip the switch to fill or drain it shows no illumination/power. I located 2 accessory fuses underneath the seat located in battery compartment, both were good. Any ideas? Thanks in advance

 

[1BadTundra]

Those switches do not illuminate, your pump may have failed. Check for voltage at your pump while someone else hits the fill switch.

 

[Cambo]

This is a helpful tool

https://jetboaters.net/threads/ballast-pump-jumper-cable.19754/