• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • JetBoaters.Net 2nd Annual SeaDoo Switch Group Buy Sponsored By JetBoatPilot Is Live Now. Save 25% Off Select SeaDoo Switch Gear through October 31st.

    Click Here to go to the Jetboatpilot Seadoo Group buy

    You can delete this notice with the "X" in the upper right>>>

2017 BRP 250hp starting issues

Kirk64

Active Member
Messages
2
Reaction score
0
Points
40
Boat Make
Chaparral
Year
2017
Boat Model
VRX
Boat Length
24
New to the site and hoping to get a little help here. I have 22hrs now on my 2017 2430 twin 250's. Suddenly the starboard engine is taking several tries to get fired. The port engine starts immediately, the starboard will turn over sometimes for 15 to 20 seconds before firing, many times the engine will partially hit causing bendix to disengage requiring re-initiation of start switch. Not certain if possibly plugs, fuel pump. O2 sensor, or other sensor. runs great once started. Any Ideas are greatly appreciated.
Thanks.....Kirk
 
Normally when an engine takes many turn to fire up, it's the camshaft position sensor that is defective, but a P0340 should normally be reported.
Is that happening on the trailer or at the dock? Is it happening on restart or on the 1st start of the day?
 
Back
Top