• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • ISLAND JAY has your Jetboaters.net Clothing, hats, stickers and more all at a 30% discount until June. Click Here for more information>SWAG for JetBoaters.net members only

    Help out a new business and show off your love of Jetboating!

    You can dismiss this notice by clicking the "X" in the upper right>>>>

2018 Yamaha 242 SE Auxiliary CAN issue

landonbrock21

Member
Messages
2
Reaction score
2
Points
12
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited S E-Series
Boat Length
24
I recently had the Transducer replaced and now I am getting no reading on any transducer information and I am getting an Auxiliary CAN issue. Any ideas on how to track this down and fix it?
 
Check the connection of the transducer to the cable. CAN is the comms bus system. So something is not plugged all the way in or one of the pins is bent in the connector.

Or it's just flat unplugged.
 
Check the connection of the transducer to the cable. CAN is the comms bus system. So something is not plugged all the way in or one of the pins is bent in the connector.

Or it's just flat unplugged.
Thank you so much!!! It was a bent pin!
 
Awesome!

Hope you check out the rest of the site and hang with us a bit. Lots of good stuff and folks here.
 
Back
Top