• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2020 242x WS Amp Issues

Pkstr242X

Active Member
Messages
14
Reaction score
0
Points
40
Location
Hillsboro, OR
Boat Make
Yamaha
Year
2020
Boat Model
X
Boat Length
24
Took the boat out tonight. Sound system worked fine while testing it in the driveway. Once we got on the water the HTX-6 went out. The WS tower amp and speakers worked fine. Then I decoded the red light warning. Either channel 5&6 short or overvoltage protect came on. Then I turned the boat and batteries off. Turned it back on and got a BCU warning. Now both amps are blinking red. I only have 7 hours on the boat and Zero mods. Anyone know how to fix this or do I have to make a trip to the dealer?
 
Took the boat out tonight. Sound system worked fine while testing it in the driveway. Once we got on the water the HTX-6 went out. The WS tower amp and speakers worked fine. Then I decoded the red light warning. Either channel 5&6 short or overvoltage protect came on. Then I turned the boat and batteries off. Turned it back on and got a BCU warning. Now both amps are blinking red. I only have 7 hours on the boat and Zero mods. Anyone know how to fix this or do I have to make a trip to the dealer?
Charge the batteries or replace them.
 
Back
Top