-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
2021 electronic port engine won’t respond to start button
- Thread starter usabas2
- Start date
tdonoughue
Jetboaters Admiral
- Messages
- 5,164
- Reaction score
- 4,245
- Points
- 437
- Location
- The Woodlands, TX 77381
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- AR
- Boat Length
- 24
I would start here: http://jetboaters.net/threads/engine-wont-start-debug-list-engine-codes-and-battery-voltage-states.1835/ (from the FAQ above--edited to replace the FAQ link with the specific one)
Also, a little more info would be good. Did you check the deadman switch? What else have you tried? Not clear on what 'ok saw pulled the wires from the port to the start engine' means.
Also, a little more info would be good. Did you check the deadman switch? What else have you tried? Not clear on what 'ok saw pulled the wires from the port to the start engine' means.
usabas2
Member
- Messages
- 7
- Reaction score
- 1
- Points
- 10
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- 212XE
- Boat Length
- 21
Working through it now. I am I am not at home so I don’t have all my tools. I just got a multi meter so that will help. What I did was swap the power unit from port to stbd no change. Then I swapped the starter solenoid and the engine will turn over but it wasn’t firing so it’s had to be a blown fuse. But there are so many inline fuses the more I look the more I find.
tdonoughue
Jetboaters Admiral
- Messages
- 5,164
- Reaction score
- 4,245
- Points
- 437
- Location
- The Woodlands, TX 77381
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- AR
- Boat Length
- 24
Yeah. One of the first things I did was stock my boat with a mini set of tools. Screwdrivers, socket set, pliers, needle nose, gloves... Very frustrating to not have your tools. Don't have a multimeter (yet).
Unfortunately can't give you too much guidance on the fuses in the 2021... but perhaps someone else can. If you don't have your tools, I assume you don't have a service manual with you either.
Unfortunately can't give you too much guidance on the fuses in the 2021... but perhaps someone else can. If you don't have your tools, I assume you don't have a service manual with you either.
