• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2021 FSH 210 Lowrance Ghost Mount

daaaddy27

Well-Known Member
Messages
52
Reaction score
21
Points
57
Boat Make
Yamaha
Year
2022
Boat Model
FSH Sport
Boat Length
21
Has anybody installed a Lowrance Ghost on their 210? I'm looking at multiple offbrand quick release mounts since Lowrance doesn't make one for the Ghost. I've ordered the Minn Kota MK23, and two Motorguide universal mounts (https://www.amazon.com/gp/product/B001GX8CH8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1 and https://www.amazon.com/gp/product/B00PA43AR6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)

I guess I'm wondering if anyone has tried either of these and how is it working out? Obviously I plan to return the two I don't use, but in the event they all fit Ghost I'd rather go with the one that is "tried and true".
 
Did you ever get the lowrance ghost trolling motor mounted? If so, have any pictures
 
Did you ever get the lowrance ghost trolling motor mounted? If so, have any pictures
Yep! I went an unconventional route. Most people I’ve seen have mounted their TM to a quick release that is attached either to the factory mount or they make their own aluminum mounts. I mounted mine to a quick release bracket that attached directly to the boat. I also tried to get mine as close to the center of the boat. So the mount isn’t in the designated spot.
There was a little bit of overhang so I created an epoxy support. Everything works great 57F12EFF-365A-4026-8703-B5BD4BF6FF86.jpegFE105DC7-2614-4F79-A0E0-812167503A81.jpeg6380E1AD-FA36-48C8-BAD0-384DFF0C83A0.jpeg87A2441A-1BF8-4B03-9420-51610C4D26CA.jpeg4369138A-9C90-4A3D-BF8B-DDCBEF819C69.jpeg
 
Back
Top