• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

6P6-8591A-01-00 ecu needed new or used

Lilyama

Active Member
Messages
3
Reaction score
4
Points
32
Boat Make
Yamaha
Year
2008
Boat Model
212X
Boat Length
21
Does anyone have a known good used or new ecu part number 6P6-8591A-01-00. I am in DFW. I will send my bad one to be rebuilt but hoping to find something to use my boat next week.
 
What problems are you having with it?

Where are you sending it to?
 
Injector #2 stuck open and dumping fuel into cylinder so it’s running extremely rich. Dealer replaced #2 injector and it didn’t change anything. Sending it out to Carmo in Cali.
 
Keep in mind that when I used carmo a few months ago, they sent my ecu to a European country to be worked on.
 
Keep in mind that when I used carmo a few months ago, they sent my ecu to a European country to be worked on.
I have been in contact with David. He told me if I got it to him by March 9th, there would be a two week turn around.
 
Back
Top