Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Electronics-Stereo/GPS/Chartplotter/Electrical etc

AR192 Stereo Upgrade

Thread starter Dietzen34
Start date Mar 16, 2018

Dietzen34

Jet Boat Junkie

Mar 16, 2018

I am looking to buy the Polk PAD4000.1 amplifier and Polk DB1242SVC subwoofer to do a modest stereo upgrade on my AR192 but wanted to get some conformation before I proceeded. Are the below assumptions correct? The stock DB651s wired in parallel would get 100W each and the subwoofer would get 400W?