skbishop90
Jet Boat Junkie
- Messages
- 389
- Reaction score
- 246
- Points
- 137
- Location
- Alabaster, AL
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- AR192
- Boat Length
- 19
Anyone know the tubing diameter for a 2015 AR192. Im about to order a wakeboard rack...
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
It does fit the thickness of my board, but the supports aren't quite long enough to provide adequate support. I tried it there and it put some small dents in the board. My board is huge though. The average board should be fine I think. A surf style board should fit much more securely in the center hold. I have an Obrien Maha 60 which is 60" long and 21" wide. The other thing I noticed is that my 2 wake boards don't stay very secure when I have my surf in the center slot because the surf board prevents the bungees from making solid contact with the wakeboards.@d_coyne1984 does your skimboard fit in a wakeboard slot? The two boards I have now are both thicker surf style and wouldn't fit, but if I order another rack, it will likely be after I get a skim style board.