AR250 Name Location

[42superman]

Can anyone with a 2021 or 2022 AR250 please list the measurements between the straps on the stern by the swim deck? Trying to design the boat name to fit in that location once the Yamaha logo is gone. Thanks

 

[tkeru408]

I took these measurements on my 252SE (different handles but they're in the same location) when I was working on my boat name. It's about 15" between the handles and about 19" from the handles to the outer edges where the cupholders start to curve in. 15" wasn't enough room for what we wanted so we chose to use the two outer sections. Jett is our last name and we have twins, so it seemed fitting.

 

[42superman]

I took these measurements on my 252SE (different handles but they're in the same location) when I was working on my boat name. It's about 15" between the handles and about 19" from the handles to the outer edges where the cupholders start to curve in. 15" wasn't enough room for what we wanted so we chose to use the two outer sections. Jett is our last name and we have twins, so it seemed fitting.

I like that setup. I plan on installing those same back rests on my AR so wasn't sure lettering would fit in that location. How tall did you go with? Thank you

 

[tkeru408]

I like that setup. I plan on installing those same back rests on my AR so wasn't sure lettering would fit in that location. How tall did you go with? Thank you

It's about 5" from the deck to the bottom of the cushion so we went with 4.25" tall letters. The boat will come with a bunch of safety stickers in that area but they're easy to remove.

 

[KCAR250]

I’m naming my boat “NO WOKE ZONE” not sure how it will fit

 

[42superman]

Used BoatDecals.biz

I think it turned out pretty good.

 

[ken4motion]

 

[Chrisbert]

ken4motion did you go with 4.25" height?

 

[ken4motion]

ken4motion did you go with 4.25" height?

I went with 4.50"

 

[mtudb24]

We're going with 4.5 by 15" for each name on a 2024 AR220 and our kids favorite movie growing up from Flushed Away with JAMMIE DODGER
Blue that matches our hull color (or close to it) with black outlined and domed