• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Audio upgrade questions

Quality looks very good. I have seen a little better connectors in very expensive RCA cables years ago but these are more than sufficient and well made. The wire itself is shielded and looks great.
 
Also, that’s their mid grade cable. They have better, I just didn’t feel the need to upgrade any higher than these. I used their mid grade power and ground wire and it was very nice so I knew it would be more than sufficient.
 
Perfect. I’ll check out the power cables as well. How many feet of speaker cable did you use ? I’m thinking 150ft should be suffice ?
 
I ordered 100’ at first and used a little too much in some spots but I ran out and couldn’t do either of the bow speakers. Also note that I cut two speakers in on the swim platform and have no tower. I still think you’ll probably need around 125’ though so I would order 150’ to be safe. It sucks to run out mid job and have to wait, especially in the mid summer heat.
 
What in-line fuse holder did you use ? What amp fuse ?
 
I used a 100A in-line fuse with switch I bought on eBay or Amazon.
 
Back
Top