• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Boat Cover

Pittsburghjetboat

Pittsburghjetboat

Active Member
Messages
6
Reaction score
3
Points
40
Boat Make
Yamaha
Year
2017
Boat Model
Limited S
Boat Length
24
is there any other option than the 1 piece boat cover offered by Yamaha? It’s sort of a pain to put on every time and the 2 “stands” with straps also IMO are not great. My dock, I only have access to the back and 1 side of the boat so it gets a little tough to install.
 
seanmclean

seanmclean

Jetboaters Admiral
Messages
2,800
Reaction score
3,821
Points
307
Location
Medford, NJ
Boat Make
Yamaha
Year
2017
Boat Model
Limited S
Boat Length
24
Since you have a tower boat, I highly recommend looking into the Hangtyte System. You'll need two sets (<$100). I'm also on a slip with only one side and stern access, and only takes a couple minutes to get the boat covered. The other option would be to install snaps and get the traditional cockpit and bow canvases.

 
You must log in or register to reply here.
Top