Boat Lift

[Madcitysal]

The specs on my new boat list the beam as 102 inches. My boat lift lists its size as 108 inches. Will I be able to get the boat on this lift, or do I need a bigger lift?
Thanks for your advice on this.

 

[d_coyne1984]

By math it should fit. I would definitely recommend no driving onto the lift, but stopping short and pulling it on by hand. I think ideally though you are going to want something wider.

One or two of these docking poles could be handy:
http://www.amazon.com/Shoreline-Marine-Boat-Hook-Piece/dp/B004D3ALOK/ref=sr_1_1?ie=UTF8&qid=1457977119&sr=8-1&keywords=docking+pole

 

[stever40]

Agree with @d_coyne1984, I went with one that is 116.5" (inside width) This gives me 4.25" on each side for clearance. I still think its tight if there is any current at all. With yours you will only have 2" of clearance on each side.