• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Bolster Removal

Thermobrett

Jetboaters Admiral
Messages
1,726
Reaction score
4,922
Points
287
Location
Lithia, Florida
Boat Make
Boatless
Year
2022
Boat Model
SX195
Boat Length
19
Does anyone know how to remove the bolster on a 2022 SX195? I have a slight tear I would like to fix and think it will be easier for me to manipulate it on a table in the AC rather than it being static mounted on the boat in my 100+ degree garage. I’m sure it’s bolted on, but how do you get to it? This will be port side aft seating (not swim platform). This is the bolster I am trying to remove as my bimini pole poked a small hole in the top. Not sure how its bolted or clipped on.
1692377508348.png
 
Last edited:
Back
Top