adamsrotors
Well-Known Member
- Messages
- 123
- Reaction score
- 51
- Points
- 57
- Location
- Sacramento
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 19
anyone added this on a 190 from a different boat maybe? would be a sweet addition.
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
center bow back cushion?
- Thread starter adamsrotors
- Start date
- Tagged users None
d_coyne1984
Jetboaters Admiral
- Messages
- 1,015
- Reaction score
- 965
- Points
- 252
- Location
- Chanhassen, MN
- Boat Make
- Other
- Year
- 2020
- Boat Model
- Other
- Boat Length
- 21
I know it"s been done. I went the cheaper and easier route and just did seadek.
adamsrotors
Well-Known Member
- Messages
- 123
- Reaction score
- 51
- Points
- 57
- Location
- Sacramento
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 19
I like the idea but wouldn't achieve the comfort factor I'm looking for here.
what's the expensive way? anyone?
what's the expensive way? anyone?
yjander
Jet Boat Junkie
- Messages
- 319
- Reaction score
- 227
- Points
- 127
- Location
- Marietta, Georgia
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- AR192
- Boat Length
- 19
Item 32 in the parts diagram. 2016 Yamaha AR192 (RM1800AR) Seat Cushion | Babbitts Yamaha Partshouse
Cushion is $330.00. Then you'd have to fabricate some way to fasten it. Likely the cushion has studs in it to attach the same way as the other backrests do. I'd like to do the same someday. But that's a tight space to try to fit into.
Cushion is $330.00. Then you'd have to fabricate some way to fasten it. Likely the cushion has studs in it to attach the same way as the other backrests do. I'd like to do the same someday. But that's a tight space to try to fit into.
adamsrotors
Well-Known Member
- Messages
- 123
- Reaction score
- 51
- Points
- 57
- Location
- Sacramento
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 19
nice. anyone have a real photo of this? would like to see it in place.
Irial29
Jet Boat Addict
- Messages
- 23
- Reaction score
- 4
- Points
- 92
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 19
I contacted Babbitts asking how the seat part fastened on but the person I was talking to didn’t seem to know or have a way to find out(???)
Yeah, if anyone knows how to get this done I’d love to know...
Yeah, if anyone knows how to get this done I’d love to know...
d_coyne1984
Jetboaters Admiral
- Messages
- 1,015
- Reaction score
- 965
- Points
- 252
- Location
- Chanhassen, MN
- Boat Make
- Other
- Year
- 2020
- Boat Model
- Other
- Boat Length
- 21
I just did it for looks because I thought it looked kind of cheap to have a big bare spot there. I know they make the thicker padded seadek. It obviously wouldn't be as comfortable as a cushion, but could be an easier compromise.
adamsrotors
Well-Known Member
- Messages
- 123
- Reaction score
- 51
- Points
- 57
- Location
- Sacramento
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 19
^ that's true and not a half bad idea.
if I can really get the template made to mimic the cushion shape, it may be a decent plan.
still noone with photos?
if I can really get the template made to mimic the cushion shape, it may be a decent plan.
still noone with photos?