Cleaning for Seadek

[AEmedic]

I have been working on getting the SeaDek installed on my AR240 and the aft came out really nice!
Currently, I am trying to clean the anchor hatch and getting all the adhesive out of the texture, even with the acetone, is a PITA! What has worked for those that have done the same?
Here is a picture of what I ah e finished so far.

 

[csmacken]

Try one of these. It saved me a lot of trouble:

Advance Auto Parts - Down for Maintenance

It creates some dust, but can easily be vacuumed out.

 

[AEmedic]

Try one of these. It saved me a lot of trouble:

Advance Auto Parts - Down for Maintenance

It creates some dust, but can easily be vacuumed out.

Did it work in the textured areas?

 

[csmacken]

With a little pressure yes

 

[csmacken]

Here’s some before and after shots of my 212x. The hydro turf was a PITA to remove.

 

[AEmedic]

Thank you, I have made progress with the rag and acetone. Luckily the area is small compared to yours!

 

[GTBRMC]

I had success with Goo Gone, a stiff bristled brush and a little water. Details: https://jetboaters.net/threads/sx-230-seadek-install-note-pix-heavy.5837/