• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Does 252 come with an anchor?

yammieboy450

Member
Messages
3
Reaction score
5
Points
12
Boat Make
Yamaha
Year
2023
Boat Model
FSH
Boat Length
25
If so dealer seems to have taken mine, with the installed chocks to hold the anchor in the bow locker, can anyone tell me what model to order online for a direct fit in the bow locker. Probably get two for secure fore/aft anchoring, would a second one fit in the aft compartment where the clean out ports are?

Thanks in advance, few more months up here in canada and time to get this thing wet.
 
No, some dealers throw in a “coast guard package”. You should ask. However, I found the Seashore slip ring anchor, usually what is in the package, did not hold well in a weedy bottom and dragged. I switched to a West Marine 8# Danforth style, modified the stock to fit the locker anchor stock rests on our AR230. The 252 locker may be bigger and hold/stow it without mods, need to measure the boat and anchor.
 
Last edited:
Back
Top