We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
I'm planning on installing one. It was a real pain unbuckling and sliding that thing out. Maybe I'll get lucky and someone at the boat show next Friday will have them?
Funny this should come up, I was just looking into the feasibility of mounting the AR190 passenger pad to a cooler top so that the entire area under the seat could be a cooler. I had been in the boat poking around with a cell phone endoscope camera looking to see if even cutting the floor to give extra depth was possible.
I have some scrap starboard laying around and planned on cutting some filler to build the recessed area level with the deck. Should be pretty easy. I'm hoping someone has them at the boat show this Friday.
Well I never did install one of these. But it's my next project 2 years later . Question is has anyone else installed one yet? Is so which model and any install tips?
I thought about it, and I blow A bit if money on the boat. But for $250 I just take the cooler out. I have forgotten to strap it In many times and never had the cooler move out of there anyway It could probably go without the strap. I have that offbrand cooler we all got an Amazon in there and now I have a soft cooler that fits between that cooler and the front foot rest on the leaning post. I use that for food and and the hard cooler for drinks the combo works out great.