• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Depth Finder

Jeromy Gaudy

Jet Boat Addict
Messages
29
Reaction score
6
Points
87
Location
Kentucky Lake
Boat Make
Yamaha
Year
2017
Boat Model
Limited S
Boat Length
21
2017 yamaha 212 Ltd factory depth finder not working. Reads 0 most of the time. Then reads random sometimes. Port hole seems to be clear and clean. Not sure what else I could check. Any help is appreciated. I do not want to have to replace it.
Thanks 🤙
 

Neutron

Jetboaters Admiral
Messages
3,289
Reaction score
5,476
Points
367
Location
New Bern, NC
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
2017 yamaha 212 Ltd factory depth finder not working. Reads 0 most of the time. Then reads random sometimes. Port hole seems to be clear and clean. Not sure what else I could check. Any help is appreciated. I do not want to have to replace it.
Thanks 🤙
There has been numerous issues documented here about the transducer failing. They are on a long backorder currently but some here have found airmar or garmin replacements that need a different connector wired in. Mine still works but i have a replacement Garmin setup ready to go if it fails
 

Jeromy Gaudy

Jet Boat Addict
Messages
29
Reaction score
6
Points
87
Location
Kentucky Lake
Boat Make
Yamaha
Year
2017
Boat Model
Limited S
Boat Length
21
Not the answer I was looking for haha. But thanks for the info brother.
 
Top