• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Engine bay/storage area panel material

haknslash

Jetboaters Fleet Admiral
Messages
7,595
Reaction score
9,099
Points
582
Location
Lake Martin, AL
Boat Make
Moomba
Year
2019
Boat Model
Other
Boat Length
23
Is it treated wood or fiberglass under the carpeted wall sections on the side of the engine/rear storage areas? I plan on finally mounting my onboard charger this week and I haven't peeked at the panels a lot to see what's under the carpet. I imagine it's treated wood but just want to confirm. I'm going to use stainless hardware of course.
 
My 08 is plywood most likely treated. I'm sure it's the same as newer units.
 
Yes, those bulkheads are plywood covered with carpet.
 
Back
Top