• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

FEll MOB install on diesel inboard.

rioryanjr

Active Member
Messages
3
Reaction score
5
Points
42
Boat Make
Other
Year
1999
Boat Model
Other
Boat Length
26
Hi All,

Anyone has installed Fell HUB/MOB with fod on a diesel-powered inboard boat.
I have 2000 Osprey with Yanmar 6LP/315 inboard. apparently Fell Marine MOB
does not support Diesel inboard. My FELL marine is installed, all 4 fob are
working just activating the lousy built in siren alarm inside the HUB! it will
not however shut down the diesel. they have a special electrical wiring using
a relay to help shut down the diesel. Has anyone done a FELL install with
inboard diesel. need advice on how it's done. Thanks in advance
 
Back
Top