• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Fiberglass professionals needed

ABoze816

Member
Messages
10
Reaction score
10
Points
12
Boat Make
Yamaha
Year
2024
Boat Model
255XD
Boat Length
25
I need help finding a great fiberglass shop in the gulf coast area.

My boat a 2024 Yamaha 255XD in slate blue. I dropped it off to be serviced at GSPS in gulf shores for my first service in December. I had some fiberglass repairs then needed to happen. After all is said and done the gel coat on the transom is very thin and the boat needs to be resprayed. This is a warranty item and will be covered by Yamaha. GSPS doesn't have the manning to be able to complete the full spray in a timely manner. GSPS is doing great with helping me out and getting my boat fixed and I am being cleared to search for fiberglass shops near me in the Navarre/Destin area.

So if anyone has any suggestions, I would like to hear them and add them to my search.

Thanks
 
Did your boat have the gelcoat blisters that are common on the 2022/2023 boats?
 
No. I noticed small white dots in the color that looked like overspray. It was measured and determined to be a thin gel coat layer
 
Back
Top