• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

For Sale: Full Part Out 2012 Yamaha 212X Jet Boat Austin Texas Running Motors Unrepairable Hull Two 1.8L NA motors

Enigma1128

Member
Messages
4
Reaction score
1
Points
10
Boat Make
Yamaha
Year
2012
Boat Model
212X
Boat Length
21
Parting out this boat or it can be taken as is. Motors are in it still with only 249 hours on them. To clarify, the boat was on the trailer, not on the water, therefore these are not water damaged engines. You're more than welcome to take thorough look at everything to know yourself. I'm selling the whole boat with trailer in the photo for $11,000 ...or purchase the TWO 1.8L Yamaha High Output jet motors from it. Each engine is 4 cylinders for $3,500 each. These are also the motors used in Yamaha's Waverunner (personal water craft). The fiberglass can't be repaired for less than the value of the boat so I am now selling as is. Both motors have been well maintained with oil changes always on time, and done by a professional shop in Austin, TX. I've only run 93 octane fuel through them and has only been in fresh water. The motors can be used as a transplant/custom job for the Yamaha Waverunner SUV 1200 4-stroke conversion. If you want them, you'll have to take them out yourself or mechanic. Best would be to buy the entire boat and trailer together to take them out and you can keep the trailer or sell it to someone after scrapping the hull once you're done.
FB 2 1.jpg3.jpg2.jpg

FB 1
 

Attachments

  • 6.jpg
    6.jpg
    77.9 KB · Views: 13
  • 7.jpg
    7.jpg
    106.1 KB · Views: 9
  • 8.jpg
    8.jpg
    89.8 KB · Views: 15
Last edited:
Do you have the dimensions of the rear middle seat? I have a 2020 242S Limited that didn't come with the seat seeing if this one would be a viable option.
 
Do you have the dimensions of the rear middle seat? I have a 2020 242S Limited that didn't come with the seat seeing if this one would be a viable option.
I actually just sold that middle seat a few days before making this post. Sorry bud
 
How did it not take on water and sink? Was it hit on the trailer?
 
How did it not take on water and sink? Was it hit on the trailer?
Yep. However, I know where the water level reaches underneath when it is floating and it is below where the damage is to the hull. It would float right now without taking on water.
 
wow, I'd like 2 1.8l engines,

just to clarify,
The boat was damaged while on the trailer,
the boat was never in the water with damage


.
 
Well, this certainly is an enigma. The OP makes it sound like the collision happened while on the water but no water got to the engines?? If this did happen on the water those inside the boat were extremely lucky to walk away from an accident that caused this type of catastrophic damage.
 
Well, this certainly is an enigma. The OP makes it sound like the collision happened while on the water but no water got to the engines?? If this did happen on the water those inside the boat were extremely lucky to walk away from an accident that caused this type of catastrophic damage.
If it happened on the water it would flood almost instantly, we all know how low the bow goes when you slow to a no wake speed. It plows very low and i see anchor rope there, it would have swamped instantly
 
Parting out this boat or it can be taken as is. Motors are in it still with only 249 hours on them. To clarify, the boat was on the trailer, not on the water, therefore these are not water damaged engines. You're more than welcome to take thorough look at everything to know yourself. I'm selling the whole boat with trailer in the photo for $11,000 ...or purchase the TWO 1.8L Yamaha High Output jet motors from it. Each engine is 4 cylinders for $3,500 each. These are also the motors used in Yamaha's Waverunner (personal water craft). The fiberglass can't be repaired for less than the value of the boat so I am now selling as is. Both motors have been well maintained with oil changes always on time, and done by a professional shop in Austin, TX. I've only run 93 octane fuel through them and has only been in fresh water. The motors can be used as a transplant/custom job for the Yamaha Waverunner SUV 1200 4-stroke conversion. If you want them, you'll have to take them out yourself or mechanic. Best would be to buy the entire boat and trailer together to take them out and you can keep the trailer or sell it to someone after scrapping the hull once you're done.
FB 2 View attachment 225459View attachment 225460View attachment 225461

FB 1
Do you have the backrest cushion that’s mounted below glove box on passenger side? The part is referred to as the Fore 5 backrest, part F2J-U35B5-10-00. If you have it, how much would you want for it?
 
Back
Top